Qingdao shengxinjie Diamond Tools Co., Ltd. specializes in the production of grinding wheel diamond pen diamond repair pen. The natural diamond dresser adopts multi particle natural diamond regularly arranged, sintered in the alloy matrix and fixed on the tool body. It is suitable for fine dressing of grinding wheel. It is an economic and practical novel grinding wheel dressing tool. It has round and square shapes. Because it is multi-point, multi-particle diamond can participate in dressing at the same time, so as to ensure the precision of grinding wheel dressing. It is the product of wide face grinding wheel. It is more unique when it is used on grinding wheel grinding machines for dressing some special shapes. Example of product representation: YP - large disc YT - small disc FP - large disc FX - Chinese disc FY - small disc usage and precautions: 1: tighten the clamping rod screw of the trimming disc before use and install it on the grinder to ensure that it is not loose during trimming. 2: The square chip can be used until all the diamonds are worn out. After the round diamond is worn, loosen the screw and turn an angle to continue to use. 3: Trim 2-4 strokes each time; Each stroke is 0.03-0.05mm, (finishing 0.05-0.02mm). The longitudinal feed speed is 100-500mm / min. the tool feeding speed should be uniform (automatic tool feeding is adopted). The feed speed should be lower during finishing The last idle stroke is 1-2 times. 4: During the trimming process, coolant shall be added from beginning to end, and quenching after heating is strictly prohibited. Note: 1: when the number of diamond grains per carat is less than 50, it is suitable for grinding wheels with dressing 36#-80# grain size. 2: When the particle size of each carat of diamond is more than 50, it is suitable for dressing 80# with fine grinding wheel.

Natural diamond angle knife: insert and weld a complete high-quality natural diamond on the handle of a certain specification, and then grind the diamond to the required angle, which greatly improves the sharpness of diamond edges and corners. The angle grinding of this product is accurate. It is suitable for the shaping angle trimming of various grinding wheels and the precision trimming of fine grinding wheels of thread grinder, internal grinder and external grinder. It is also a product of abrasive tool industry and scientific research and test stylus manufacturing industry

generally, angle knives can be divided into cones and square sharp angles of 40 degrees, 60 degrees, 90 degrees and 120 degrees according to the user's situation (the angle and handle specification can be made according to the user's requirements.) Handle diameter is generally divided into 6mm, 8mm, 10mm and 12mm

It is not suitable to collide with [diamond pen for grinding wheel dressing of NC grinder]

this diamond diamond is 0.2-0.3 carat, with good natural sharp angle, high toughness and good wear resistance. It is suitable for rough and fine grinding of grinding wheels with a width of less than 300mm. It is an economic grinding wheel dressing tool